Simple install : 컴컴컴컴컴컴컴컴 1.) Press F2 2.) Press ENTER 3.) Press ENTER That's all. Now start "YO! JOE!". (simply enter "JOE" at DOS-prompt) 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 REMARK: For trouble shooting look also in INFO.EXE and game instructions. 컴컴컴컴컴컴컴컴컴컴 VIDEO 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� *** Video-adapters *** 旼컴컴컴컴쩡컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � Setup: � Video adapter � 쳐컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � Type 1 �- ET4000 � � �- Trident � � �- PS/2 Model 50 � � �- Compaque Deskpro � � � and some other video-adapters � 쳐컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � Type 2 �- ET3000 � � � and some other video-adapters � 쳐컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� � Type 3 � almost any other video-adapters � 읕컴컴컴컴좔컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� REMARK : Change video-adapter-type in SETUP.EXE only, if there are errors during the scrolling or if some graphics are "flickering". Try type 1 first **** Video-frequency **** Choose 50 Hz mode. Only if your monitor is not able to display 50 Hz change to 60 Hz mode (and than to 70 Hz). REMARK: If you choose a higher video-frequency, the game will be faster and it will become more difficult. 컴컴컴컴컴컴컴컴컴컴 MISC 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Install two players: 컴컴컴컴컴컴컴컴컴컴 1 player-mode : This requires 480 K RAM only ! But you can't play the two-playermode. 2 player-mode : This requires at least 580 K RAM. Choose 1 playermode,if "YO! JOE!" reports "Out of memory"-error. Joystick: 컴컴컴컴� The joystick is autodetected (and calibrated) at the start of "YO! JOE!". Choose "no joystick" to disable autodetect. Panelman: 컴컴컴컴� There are two little panelmen (in the panel at the score-display). Disable panelmen to save time only. 컴컴컴컴컴컴컴컴컴컴 SOUND 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� REMARK: No music is supported in the DEMO-version (to save disk-memory). 旼컴컴컴컴컴컫컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 쿞etup entry � Remark � 쳐컴컴컴컴컴컵컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 쿛C-Speaker � only a few sound effects are supported with PC-Speaker � 쳐컴컴컴컴컴컵컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 쿞oundblaster� see SOUNDBLASTER manual � 쳐컴컴컴컴컴컵컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캑 쿏/A � see INFO.EXE . digital/analog-converter on printerport � 읕컴컴컴컴컴컨컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 This configuration will run on almost any hardware. ( This version was tested on: - an original IBM PS/2 Model 50. - COMPAQUE Deskpro 386/20e - AT 286 with 10 Mhz, no joystick, more than 580K memory, VGA with 256 K - 486 DX 33 Mhz; ET4000; Soundblaster; 2-joysticks - 386 DX 40 Mhz; Trident; D/A on LPT1; 1-Jostick - 386 DX 40 Mhz; ET3000; (you need to change video-adapter to type 2 - AT 286 12 Mhz; ET4000 - AT 286 16 Mhz; ET3000 .... JOE also works with novell-netware.) DOS-Version: 컴컴컴컴컴컴 You must have a DOS-Version greater than DOS 3.00 Tested on: DOS 3.3, DR-DOS and MS-DOS 5.0 If you have trouble starting "YO! JOE!", remove all TSRs and all device drivers in CONFIG.SYS and AUTOEXEC.BAT first. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Contact to SCIPIO : e-mail adresse : scipio@pool.informatik.rwth-aachen.de